SATCONMICRO-ACT
Thermostat for wall mounting
The SATCONMICRO-ACT is a wall-mounting thermostat with a Hygiene Display and touch function.
In the menu, you can select the operating mode (heating/cooling) for each channel, as well as whether you wish to control the channel with hysteresis or PID control! For easy configuration, it is equipped with an assisted parameter programming system
, ensuring that only parameters relevant to the specifically selected application are displayed. This makes the
controller’s programming faster and more efficient. Naturally, a Standby (X) button and an info menu are also available.
Properties
- Power supply
- Auto-tuning function for PID control or two-point control
- Main output via relay 12(3.6)A and auxiliary output via relay 7(1)A
- Inputs for PTC/NTC10K
- Resolution 0.1 / 1°C or 1°F
- Selection of cooling or heating function
- Relative or absolute alarm thresholds
- Standby button on the front panel
- Power-on limitation and safety function for sensor failure
- Connection for LAE monitoring system TAB
Applications
- Small cold rooms
- Refrigerators
- Heating systems
- Server room monitoring
Advantages
- 2 independent outputs, ideal for air conditioning control
- Hygiene Display
Technical data
| SATCON micro-ACT | |
|---|---|
| Sensor type | NTC10k / PTC1000 (KTY81-121) |
| Standard equipment | 1 x SN4B20P1 |
| Sensor measuring range | -40 °C … +120 °C |
| Electronics control range | -50 °C … +150 °C |
| Resolution | 0.1° |
| Terminals | Screw terminals |
| Output type | |
| Relay 1 / N.O. contact | 12(3.6)A |
| Relay 2 / N.O. contact | 7(1)A |
| Interface | RS485 |
| Power supply | 100 … 240 Vac |
| Dimensions WxHxD | 110x53x75 mm |
| Installation dimension | Wall surface mount |
| Front protection rating | IP65 |
| Certification | CE |